XSECTION

PROPOSED XS

/* >>> For english, reset the tolerance to 0.10 <<< */
Tolerance = 0.10

PATTERN BY STATION
PATTERN SET
JOB NUMBER = RDY
BASELINE = L
HORIZ SCALE = 10
VERT SCALE = 10
BEGINNING STATION = 1000
ENDING STATION = 5500
EVEN = 50
LT = 150
RT = 150

DEFINE "TM01 CONFIG" 0

DEFINE "SH01 WIDTH" 8
DEFINE "SH01 PAVED" 2

DEFINE "BS01 FRONT DITCH SLOPE" 4
DEFINE "BS01 FRONT DITCH WIDTH" 8
DEFINE "BS01 BACK DITCH SLOPE" 3
DEFINE "BS01 BACK DITCH WIDTH" 12
DEFINE "BS01 BERM SLOPE IN DECIMAL FORMAT" 0.02
DEFINE "BS01 BERM WIDTH" 7
DEFINE "BS01 FIXED FILL SLOPE" 2
DEFINE "BS01 FIXED CUT SLOPE" 1.5

DEFINE "PAVEMENT DEPTH" 12

/* >>> For english, change the extension from .met to .eng <<< */
include L:\standard.eng

CRITERIA FOR SHAPE CLUSTER
SHAPE CLUSTER BASELINE = L
SHAPE CLUSTER PROFILE = L
SHAPE CLUSTER TIE = 0

SIDE SLOPE LT
   include L:\tmplt01.cri
   include L:\shld01.cri
   include L:\boss01.cri

SIDE SLOPE RT
   include L:\tmplt01.cri
   include L:\shld01.cri
   include L:\boss01.cri

SHAPE DGN = [TIP]_RDY_SHP_[DESC].DGN
SHAPE SET
TYPE = CMP_SHAPE
LVNAME = Prop Geopak Pavement Shape Dependent
LVNAME = Prop Geopak Pavement Shape Independent

XS DGN = [TIP]_RDY_XSC_[DESC].DGN
EXISTING GROUND LINE
TYPE = LINE,LINE_STRING
LVNAME = Exist XS Ground Line

PLOT PARAMETERS
LINE
LVNAME= Prop XS Dump Level

PAVEMENT THICKNESS = 0.0
DO NOT FILL GAPS BETWEEN CLUSTERS
WRITE XS INTO DGN = [TIP]_RDY_XSC_[DESC].DGN

/*** Extra line needed to be copied into your input file. ***/