Launch Model Navigator through the RD_DSN tool
frame.
After the application has been loaded, the current
design file name and the current active model
name are displayed.
View Option
None -
With the next model opened, no view intervention is applied.
That view will be the last view area of model.
Fit - With
the next model opened, that view will be "fitted"
to screen of all graphical elements displayed. An example
application of this view option is when navigating through
cross section sheets (XPL).
Same -
With the next model opened, that view will be same as the
previous model view. An example application of this view
option is if the DSN file is composed of many models, right
of way, horizontal alignment, and slope stake. Navigating
through these models will have the same view area as the
previous model view. Similar to RD_AutoXD.
Three ways to navigate with the Model
Navigator
Drop Down Combo Box
Navigation Buttons
Automatic Mode
Note that the Model Open and Close Speed setting
is in seconds. Fastest speed is 1 second between models. Slowest
speed can be set to 10 seconds between models.
Disclaimer:
The content on the CADD Tutorial Web Pages are to be use as a general guide
in producing a set of NCDOT Roadway plans. It should not be used as the
sole reference to seal a set of plans. All other official manuals, such
as THE
ROADWAY DESIGN MANUAL and AASHTO A POLICY ON GEOMETRIC DESIGN OF HIGHWAYS
AND STREETS (The "Green" Book) take precedence. The content contained
on the CADD Tutorial web pages has no legal merit.
NC DOT
NC DOH
NC GOV
